HP FlexNetwork MSR 954 - Configuring Basic Settings for the Router

24
• The configuration terminal displays information correctly. You can see the startup window on
the local configuration terminal. For more information, see "Observing the startup process."
• After completing the POST, the system prompts you to press Enter. When the command line
prompt appears, the router is ready to configure.
Configuring basic settings for the router
After the router is powered on for the first time, configure basic settings for the router. For more
information, see HPE FlexNetwork MSR Router Series Configuration Guides(V7) and HPE
FlexNetwork MSR Router Series Command References(V7).