hpshowdisk
Synopsis
hpshowdisk
Description
The hpshowdisk utility helps to identify disks recognized by the system. This utility can be
useful when the system has a large number of disks, typically on SAN architectures. Besides
device name and size, the utility includes information about disk controller, SAN storage devices
WWIDs, and SAN logical disks LUNs.
The hpshowdisk utility is internally used by SSTK scripts to display the Available Disks menu
during installations. It is also used externally with the Rapid Deployment Pack where, by default,
it is called the showdisk application. SSTK scripts uses the -n option to avoid this external
application call.
Options
Table 5-16 hpshowdisk Options
DescriptionOption
Prints the version.
-v | --version
Prints this help.
-h | --help
Do not use Altiris RDP showdisk as device order.-n | --no-showdisk
Device index.
-i idx
Dumps PCI information for device in format vendor:device:svendor:sdevice.-p
Dumps device name for device.
-d
Dumps the disk size.
-s
Example
The following figure shows an example of hpshowdisk output in a system with 19 disks:
• 5 smart array disks (disks 15 to 19)
• 3 SAN disks through QLogic HBA cards (disks 9 to 11)
• 6 SAN disks through Emulex HBA cards (disks 3 to 8)
• 5 LSI disks through Emulex HBA cards (disks 1, 2, 12, 13 and 14)
92 Utilities Reference
To Next Page
Loading...
Need help?
General
