HP Integrity Superdome X - Page 16

QuickSpecs
HPE Integrity Superdome X
Ordering and Configuration
Page 16
BL920s Server Blade DIMM Arrangement
NOTE: Per the commonality guidelines, the first DIMMs to be loaded will have white DIMM connector latches loaded on the
blade. Therefore, "A" and "B" connector latches will be white. Connectors in slot positions "C", "D", “E” and “F” will have black
latches.
The following table shows the supported configurations as shipped from the factory
NOTE: Mixing DIMM sizes within the same blade is not supported.
NOTE: For the BL920s Gen8 blade, the 16GB DIMMs are only supported with 16 DIMMs (min/max) per BL920s Gen8 Server
Blade.
Recommended Configurations per BL920s Server Blade
Total Memory
per Blade
(GBytes)
Number of DIMMS
Echelon A
Echelon B
Echelon C
Echelon D
Echelon E
Echelon
F
16GB DIMMs
32GB DIMMs
64GB DIMMs
256 16
16G 16G
512 (Gen9 v3)
32
16G 16G 16G 16G
512
16
32G 32G
768 (Gen9 v3)
48
16G 16G 16G 16G
16G
16G
1024
32
32G 32G 32G 32G
1024 (Gen9)
16
64G 64G
1536
48
32G 32G 32G 32G
32G
32G
2048 (Gen9)
32
64G 64G 64G 64G
3072 (Gen9)
48
64G
64G
64G
64G
64G
64G
HPE Superdome X
Interconnect
Module Support
HPE Superdome X will support some of the same I/O cards and I/O interconnect modules as the HPE
BladeSystem c7000 and c3000 Enclosures. FlexLOMs and/or Mezzanine I/O cards installed on the Blades are
routed through the Superdome Enclosure as depicted in the following picture and table: