HP Integrity Superdome X - Default Chapter; Table of Contents

QuickSpecs
HPE Integrity Superdome X
Ordering and Configuration
Page 18
Modules
HP 6125XLG Ethernet Blade Switch
711307-B21
HP 10GbE Ethernet Pass-Thru Module for c-Class BladeSystem
538113-B21
HP 6125G Ethernet Blade Switch
658247-B21
HP Cisco B22HP Fabric Extender for BladeSystem c-Class
641146-B21
NOTE:
Not available factory integrated in bays 1 & 2; can be factory integrated in bays 3-
8
HP Cisco B22HP Fabric Extender with 16 FET for BladeSystem c-Class
657787-B21
NOTE: Not available factory integrated in bays 1 & 2; can be factory integrated in bays 3-
8
Brocade 16Gb/28 SAN Switch Power Pack+ for BladeSystem c-Class
C8S47A
Brocade 16Gb/16 SAN Switch for BladeSystem c-Class
C8S45A
HP 4X FDR InfiniBand Managed Switch Module for c-Class BladeSystem
648311-B21
NOTE: BL920s Gen9 only
HP 4X FDR InfiniBand Switch Module for c-Class BladeSystem
648312-B21
NOTE:
BL920s Gen9 only
Converged
Networking
HP FlexFabric 20Gb 2-port 630FLB Adapter
700065-B21
HP FlexFabric 20Gb 2-port 630M Adapter
700076-B21
HP FlexFabric 10Gb 2-port 534FLB Adapter
700741-B21
HP FlexFabric 10Gb 2-port 534M Adapter
700748-B21
NOTE:
FlexLOM and Mezzanine I/O cards mentioned are supported in HPE BL920s
Server blades.
NOTE: FlexFabric 534FLB/534M adapters not supported with Windows Server or SQL
Server.
NOTE: FlexFabric 20Gb 2-port 630 Adapters supported with BL920s Gen9 only.
Networking
HP Ethernet 10Gb 2-port 560FLB Adapter
655639-B21
HP Ethernet 10Gb 2-port 560M Adapter
665246-B21
Storage
HP QMH2672 16Gb Fibre Channel Host Bus Adapter
710608-B21
InfiniBand
HP InfiniBand FDR 2-port 545M Adapter
702213-B21
NOTE: InfiniBand FDR 2-port 545M Adapter only supported with BL920s Gen9
HPE Superdome X
Boot Support
Fibre Channel is the only supported local disk option
• MSA 2040 is the recommended FC Array, see
https://www.hpe.com/h20195/v2/GetPDF.aspx/c04123144
• Other HPE Fibre Channel storage devices are supported for boot and SAN connectivity. For details,
see the HPE SPOCK
website.
• NOTE: for FC, a SAN Switch is required
Each partition (nPar) requires dedicated boot path(s
)
• One dedicated FC HBA per partition
• FC: 710608-B21 - HPE QMH2672 16Gb FC HBA
• Two dedicated FC HBAs for Serviceguard
• Dual port HBAs may utilize “second” port for data access