HP Invent XW6200 User Manual

Installing a Hard Drive
2–6 SATA Hard Drive Installation Guide
4. Connect the data cable to the SATA data connector on the
new drive as shown in the following illustration.

Five data cables are provided in the kit. Refer
to the “SATA Hard Drive Cables” card
included in the kit to determine which cable
is required for your system board.
Ä
CAUTION: The data cable end is keyed to
ensure proper alignment. To avoid damage
to the cable header pins, check the
header/connector alignment and push
gently when connecting the data cable
header to the SATA connector on the drive
and system board.
345524-B21.book 6 ページ ２００３年８月２２日 金曜日 午後４時６分
All manuals and user guides at all-guides.com

HP Invent XW6200 Specifications

General

Network	Integrated Gigabit Ethernet
Memory	Up to 16GB DDR2
Storage	SATA hard drives
Operating System	Windows
Expansion Slots	PCI
Optical Drive	DVD-ROM
Ports	USB, Serial, Parallel
Form Factor	Tower