Configuring the Computer
SATA Hard Drive Installation Guide 3–2
Turn on your computer and read the messages that appear during
startup.
Q If the system recognizes the new drive, information about
the drive displays on the screen and you are prompted to
press F1 to save and continue.
Q If you are not prompted to press F1, there is a problem with
the installation of the drive, and you need to diagnose the
problem. Start by reviewing the steps in this guide.
Creating a Partition Using Microsoft
Windows 2000
To create a partition for the additional drive using Microsoft
Windows 2000:
1. Log in as Administrator.
2. From the Windows desktop click Start > Settings > Control
Panel.
3. Click Administrative Tools.
4. Click Computer Management.
5. Click Storage.
345524-B21.book 2 ページ ２００３年８月２２日 金曜日 午後４時６分
To Next Page
Loading...
Need help?
General
