HP iPAQ hx2000 Series - Charging with the AC Adapter

8VHU·V*XLGH ²
0DQDJLQJWKH%DWWHU\
3. Lift the left side of the battery up and remove it from the
Pokcet PC.
Ä
CAUTION: Because most of the applications and data you install on
your Pocket PC are held in memory (RAM), you will need to reinstall
them if the battery completely discharges or if the battery is removed
from the unit for more than 15 minutes. Otherwise, when fully charged,
the internal backup battery saves the user-installed data for up to 15
minutes when the standard battery is removed. Before removing the
battery, check to see that the internal backup battery is fully charged by
tapping Start > Settings > System tab > Power.
You do not need to reinstall applications and data installed in the iPAQ
File Store folder because they are saved in nonvolatile memory.
Charging with the AC Adapter
The standard AC Adapter works in a standard electrical outlet.
You can also charge your Pocket PC in your automobile with an
optional automobile adapter that works in your vehicle’s
electrical cigarette lighter or a 12-volt power outlet.
To purchase an optional automobile adapter, refer to the HP Web
site at:
www.hp.com/go/ipaqaccessories.