HP iPAQ hx2000 Series - Charging with the HP Ipaq Cradle and AC Adapter

8VHU·V*XLGH ²
0DQDJLQJWKH%DWWHU\
Charging with the HP iPAQ Cradle and
AC Adapter
Use the HP iPAQ cradle to charge your Pocket PC.
NOTE: It is not necessary to synchronize your Pocket PC before
charging it.
To charge your Pocket PC using the HP iPAQ cradle:
1. Plug the AC Adapter into an electrical outlet 1 and connect
the other end of the AC Adapter to the AC connector on the
HP iPAQ cradle 2.
2. Slide the bottom of your Pocket PC into the HP iPAQ
cradle 3 and push firmly to seat it.
Ä
CAUTION: To avoid damaging your Pocket PC or the cradle, check to
be sure the Pocket PC and cradle connectors are properly aligned
before pushing the Pocket PC into the HP iPAQ cradle.