HP Irvine - Boot Device Configuration

22
Boot Menu
► Boot-time Diagnostic Screen
When enabled, the Power On System Test (POST) routine will show its testing results line by
line on the screen.
When disabled, only HP LOGO screen will be displayed.
► Boot Device Priority
Press <Enter> to go to the sub-menu. The priority table allows you to set the boot sequence
from different devices.
Boot-time Diagnostic Screen [Disabled] Item Help
► Boot Device Priority
Menu Level ►
Display the diagnostic
screen during boot.
F1:Help F5:Setup Defaults F10:Save and Exit ESC:Exit
Main Advanced Power Boot Exit
Phoenix - AwardBIOS CMOS Setup Utility
Boot
Disabled
F1:Help F5:Setup Defaults F10:Save and Exit ESC:Exit