HP Irvine - Boot Device Priority

23
Boot Device Priority
► 1st Boot Device
In the display above, it indicates the Floppy drive is the rst boot device by default. You can
press <Enter> to go to its sub-menu, then select another device to replace it. The device
groups in the list are Floppy, CD-ROM, HDD and Network groups.
► 2nd Boot Device
► 3rd Boot Device
► 4th Boot Device
Same denitions as the 1st Boot device.
► Floppy Group Boot Priority
Within a device group, there could be more than one device (such as two hard disks) installed
in your system. This priority setting allows you to arrange the boot sequence of different drives
within a device group.
► CD-ROM Group Boot Priority
► HDD Group Boot Priority
► Network Group Boot Priority
Same denitions as the Floppy Group Boot Priority.
Boot Device Priority Item Help
1st Boot Device [Floppy Group]
Menu Level ►
2nd Boot Device [CD-ROM Group] <Enter> to select
3rd Boot Device [HDD Group] device.Up or down
4th Boot Device [Network Boot Group] : Move Enter: Accept
Esc: Abort
► Floppy Group Boot Priority [MITSUMI]
► CD-ROM Group Boot Priority [Not Installed]
► HDD Group Boot Priority [SAMSUNG HD081]
► Network Group Boot Priority [Not Installed]
F1:Help F5:Setup Defaults F10:Save and Exit ESC:Exit
Phoenix - AwardBIOS CMOS Setup Utility
Boot
Floppy Group
F1:Help F5:Setup Defaults F10:Save and Exit ESC:Exit