EasyManuals Logo

HP J9984A Installation And Getting Started Guide

HP J9984A
59 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
1-1
1
Switch Overview
The HP 1820 Switch Series are multiport switches that can be used to build
high-performance switched workgroup networks. These switches are store-
and-forward devices that offer low latency for high-speed networking. Three
of the switches also support the IEEE 802.3at standard for providing PoE+
power to connected devices.
Throughout this manual, these switches will be referred to as the 1820-8G
Switch, 1820-24G Switch, 1820-48G Switch, 1820-8G-PoE+ Switch, 1820-24G-
PoE+ Switch, and the 1820-48G-PoE+ Switch.
The 1820-8G Switch has 8 auto-sensing 10/100/1000BASE-T RJ-45 ports.
Port 1 is a Power over Ethernet Powered Device (PoE PD) port. The
switch can be powered by a network connection to port 1 from PoE power
sourcing equipment (PSE), such as a PoE switch.
The 1820-24G Switch has 24 auto-sensing 10/100/1000BASE-T RJ-45 ports
and two SFP slots for supported HP SFP fiber-optic transceivers (ports
25 and 26).
The 1820-48G Switch has 48 auto-sensing 10/100/1000BASE-T RJ-45 ports
and four SFP slots for supported HP SFP fiber-optic transceivers (ports
49 to 52).
The 1820-8G-PoE+ Switch has 8 auto-sensing 10/100/1000BASE-T RJ-45
ports. The switch supports the IEEE 802.3at standard and is capable of
providing 65 watts of PoE power through ports 1-4.
The 1820-24G-PoE+ Switch has 24 auto-sensing 10/100/1000BASE-T RJ-45
ports and two SFP slots for supported HP SFP fiber-optic transceivers
(ports 25 and 26). The switch supports the IEEE 802.3at standard and is
capable of providing 185 watts of PoE power through ports 1-12.
The 1820-48G-PoE+ Switch has 48 auto-sensing 10/100/1000BASE-T RJ-45
ports and four SFP slots for supported HP SFP fiber-optic transceivers
(ports 49 to 52). The switch supports the IEEE 802.3at standard and is
capable of providing 370 watts of PoE power through ports 1-24.
These switches can be directly connected to computers, printers, and servers
to provide dedicated bandwidth to those devices, and you can build a switched
network infrastructure by connecting the switch to hubs, other switches, or
routers. In addition, these switches offer network management capabilities.

Other manuals for HP J9984A

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP J9984A and is the answer not in the manual?

HP J9984A Specifications

General IconGeneral
BrandHP
ModelJ9984A
CategorySwitch
LanguageEnglish

Related product manuals