HP JD320B

Parameters
threshold-value: Errored frame seconds event triggering threshold, ranging from 0 to 900.
Description
Use the oam errored-frame-seconds threshold command to set the errored frame seconds event
triggering threshold.
Use the undo oam errored-frame-seconds threshold command to restore the default.
By default, the errored frame seconds event triggering threshold is 1.
Related commands: oam errored-frame-seconds period, display oam link-event, and display oam
configuration.
Examples
# Set the errored frame seconds event triggering threshold to 100.
<Sysname> system-view
[Sysname] oam errored-frame-seconds threshold 100
oam errored-symbol period
Syntax
oam errored-symbol period period-value
undo oam errored-symbol period
View
System view
Default level
2: System level
Parameters
period-value: Errored symbol event detection interval, ranging from 1 to 60 (in seconds).
Description
Use the oam errored-symbol period command to set the errored symbol event detection interval.
Use the undo oam errored-symbol period command to restore the default.
By default, the errored symbol event detection interval is one second.
Related commands: oam errored-symbol threshold, display oam link-event, and display oam
configuration.
Examples
# Set the errored symbol event detection interval to 10 seconds.
<Sysname> system-view
[Sysname] oam errored-symbol period 10
oam errored-symbol threshold
Syntax
oam errored-symbol threshold threshold-value
14