HP JD320B Command Reference

dldp unidirectional-shutdown
Syntax
dldp unidirectional-shutdown { auto | manual }
undo dldp unidirectional-shutdown
View
System view
Default level
2: System level
Parameters
auto: Configures the port shutdown mode as auto mode, where, when a unidirectional link is detected,
the port involved is shut down by DLDP.
manual: Configures the port shutdown mode as manual mode, where, when a unidirectional link is
detected, DLDP generates log and traps to prompt you to shut down the involved port instead of doing
so automatically.
Description
Use the dldp unidirectional-shutdown command to set the port shutdown mode.
Use the undo dldp unidirectional-shutdown command to restore the default.
By default, the port shutdown mode is auto mode.
Related commands: dldp work-mode.
Examples
# Set the port shutdown mode to auto mode.
<Sysname> system-view
[Sysname] dldp unidirectional-shutdown auto
dldp work-mode
Syntax
dldp work-mode { enhance | normal }
undo dldp work-mode
View
System view
Default level
2: System level
Parameters
enhance: Specifies the enhanced DLDP mode.
normal: Specifies the normal DLDP mode.
Description
Use the dldp work-mode command to set the DLDP mode.
27

HP JD320B Specifications

General

Brand	HP
Model	JD320B
Category	Switch
Language	English