Monitor Link configuration commands
(available only on the A3100 V2 EI)
display monitor-link group
Syntax
display monitor-link group { group-id | all } [ | { begin | exclude | include } regular-expression ]
View
Any view
Default level
1: Monitor level
Parameters
group-id: Monitor link group ID, in the range of 1 to 16.
all: Displays information about all monitor link groups.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Description
Use the display monitor-link group command to display monitor link group information.
Examples
# Display information about monitor link group 1.
<Sysname> display monitor-link group 1
Monitor link group 1 information:
Group status: DOWN
Last-up-time: 16:37:20 2009/4/21
Last-down-time: 16:38:26 2009/4/21
Member Role Status
------------------------------------------
Ethernet1/0/1 UPLINK DOWN
Ethernet1/0/2 DOWNLINK DOWN
38
To Next Page
Loading...
