ENWW 134
5
Configuring for LPD Printing
Introduction
The HP Jetdirect print server contains an LPD (Line Printer
Daemon) Server module to support LPD printing. This chapter
describes how to configure the HP Jetdirect print server for use
with various systems that support LPD printing. These
instructions include:
● LPD on UNIX Systems
■ Configuring BSD-based UNIX systems using LPD
■ Configuring print queues using the SAM utility (HP-UX
systems)
● LPD on Windows NT/2000/Server 2003 Systems
● LPD on Windows XP Systems
● LPD on Mac OS Systems
Note For other systems not listed, refer to your operating
system documentation and online help.
Recent versions of Novell NetWare (NetWare 5.x
with NDPS 2.1 or greater) support LPD printing.
For setup instructions and support, refer to the
documentation supplied with NetWare. Also, refer
to the Technical Information Documentation (TID)
on Novell’s support Web site.
To Next Page
Loading...
Need help?
General
