ENWW Configuring for LPD Printing 145
c. Then click OK.
Note The HP Jetdirect print server treats text files as
unformatted text or ASCII files. Files that are raw
are formatted files in PCL, PostScript, or HP-GL/2
printer languages.
If the queue type is binps, the PostScript interpreter
is instructed to interpret the print job as binary
PostScript data.
7. Select the Manufacturer and Printer model. (If necessary, click
Have Disk and follow the instructions to install the printer
driver.) Click Next.
8. Choose to keep the existing driver, if prompted. Click Next.
9. Enter a printer name, and choose whether this printer will be
the default printer. Click Next.
10. Choose whether this printer will be available to other
computers. If shared, enter a share name that identifies the
printer to other users. Click Next.
11. If desired, enter a location and other information for this printer.
Click Next.
12. Choose whether to print a test page, and click Next.
13. Click Finish to close the wizard.
To Next Page
Loading...
Need help?
General
