ENWW HP Software Solutions Summary 18
Installing HP Web Jetadmin
Before installing the HP Web Jetadmin software, you must have
administrator or root privileges on the local system:
1. Download the installation files from HP online support at
http://www.hp.com/go/webjetadmin
.
2. Follow the instructions on the screen to install the HP Web
Jetadmin software.
Note Installation instructions are also contained in the
HP Web Jetadmin install file.
Verifying Installation and Providing Access
● Verify that the HP Web Jetadmin software is correctly installed
by navigating to it with your browser as shown in the following
example:
http://systemname.domain:port/
where systemname.domain is the host name of your Web server
and port is the port number assigned during installation. By
default, the port number is 8000.
● Provide users access to HP Web Jetadmin software by adding a
link to your Web server’s home page that is addressed to HP Web
Jetadmin’s URL. For example:
http://systemname.domain:port/
Configuring and Modifying a Device
Using your browser, navigate to HP Web Jetadmin’s URL.
For example:
http://systemname.domain:port/
To Next Page
Loading...
Need help?
General
