HP Jetdirect J7949e - Page 220

ENWW The HP Jetdirect Control Panel Menu 220
PING RESULTS Use this item to view the ping test status and
results using the control panel display. You
can select the following items:
● PACKETS SENT: Displays the number of
packets (0 - 65535) sent to the remote
host since the most recent test was
initiated or completed.
● PACKETS RECEIVED: Displays the
number of packets (0 - 65535) received
from the remote host since the most
recent test was initiated or completed.
● PERCENT LOST: Displays the percent of
ping test packets that were sent with no
response from the remote host since the
most recent test was initiated or
completed.
● RTT MIN: Displays the minimum
detected round-trip-time (RTT), from 0 to
4096 milliseconds, for packet
transmission and response.
● RTT MAX: Displays the maximum
detected round-trip-time (RTT), from 0 to
4096 milliseconds, for packet
transmission and response.
● RTT AVE: Displays the average
round-trip-time (RTT), from 0 to 4096
milliseconds, for packet transmission and
response.
● PING IN PROGRESS: Displays whether
or not a ping test is in progress. YES
indicates a test in progress, and NO
indicates that a test completed or was not
run.
● REFRESH: When viewing the ping test
results, this item updates the ping test
data with current results. Select YES to
update the data, or NO to maintain the
existing data. However, a refresh will
automatically occur when the menu times
out or you manually return to the main
menu.
Table B.1 HP Jetdirect Control Panel Menu (6 of 7)
Menu Item Options Description of settings