ENWW HP Software Solutions Summary 29
3. If AppleTalk is not active, an alert dialog box appears on your
screen. Select OK. The Active button turns on.
If your network is linked to other networks, the AppleTalk
Zones list dialog box appears in the Chooser.
4. If applicable, select the zone in the AppleTalk Zones scrolling
list where your printer is located.
5. Select the printer name you want to use from the list of printer
names in the upper-right area of the Chooser. If the printer's
name does not appear in the list, make sure the following tasks
have been performed:
■ the printer is turned on and is online.
■ the print server is connected to the printer and to the network.
■ the printer cable connections are secure.
A READY message should appear if the printer has a control panel
display. See Chapter 8
for more information.
Note If your printer is the only name listed in the
dialog box, you must still select it. Your printer
remains selected until you select a different printer
with the Chooser.
6. Click Setup or Create in the Chooser; then, if prompted, select
the appropriate PostScript Printer Description file (PPD) for the
printer. For more information, see the online documentation.
7. Set Background Printing to ON or OFF.
If background printing is turned OFF when you send a print job
to the printer, status messages appear on your screen and you
have to wait until the messages clear before continuing your
work. If background printing is turned ON, the messages are
redirected to the PrintMonitor and you can continue working
while the printer is printing your job.
8. Exit the Chooser.
To display your user name on the network when you are printing
documents, go into the Control Panel on your Mac OS computer,
select Sharing Setup, then type your owner name.
To Next Page
Loading...
Need help?
General
