ENWW TCP/IP Configuration 86
Menu Interface
An optional Menu interface is displayed when you type menu at the
Telnet command prompt. The Menu interface eliminates the need
to memorize commands, and provides structured menu lists for easy
access to configuration parameters.
Figure 3.1
illustrates the Menu interface, using the TCP/IP menus
as an example.
● From the Main Menu screen, select and enter a menu number.
If there are submenus, select and enter a submenu number.
● If you want to change a parameter setting, enter “Y” (for “Yes”)
when prompted.
Changes to parameters are made by editing the setting through
the use of the Backspace key. If an unrecognized value is
entered, the correct entry options will be displayed.
Note Changes are not saved on the Jetdirect print server
until you exit a menu and, when prompted, choose
to save your changes.
To Next Page
Loading...
Need help?
General
