4. Check the fuser connections (callout 1) on the engine-power assembly. Also check the high
voltage connection at the back side of the printer.
NOTE The following figure shows the HP LaserJet 1010 series products. The
connections are located at the same place on the HP LaserJet 1018 printer.
Figure 6-3 Check the fuser connections (HP LaserJet 1010 series shown)
If a transfer problem exists, replace the transfer roller (do not touch the black-sponge portion of the
transfer roller). If a fuser problem exists, first check to make sure that the four cables to the fuser are
correctly seated in the engine-power assembly.
108 Chapter 6 Troubleshooting ENWW
Download Service Manual And Resetter Printer at http://printer1.blogspot.com
To Next Page
Loading...
