Card stock and heavy media
For optimum performance, do not use paper heavier than 157-g/m
2
(42-lb). Paper that is too heavy
might cause misfeeds, stacking problems, jams, poor toner fusing, poor print quality, or excessive
mechanical wear.
Card-stock construction
●
Smoothness: 135- to 157-g/m
2
(36- to 42-lb) card stock should have a smoothness rating of
100 to 180 Sheffield. 60- to135-g/m
2
(16- to 36-lb) card stock should have a smoothness rating
of 100 to 250 Sheffield.
● Construction: Card stock should lie flat with less than 5 mm (0.2 inch) of curl.
●
Condition: Make sure that the card stock is not wrinkled, nicked, or otherwise damaged.
●
Sizes: Only use card stock within the following size ranges:
● Minimum: 76 x 127 mm (3 x 5 inches)
● Maximum: 216 x 356 mm (8.5 x 14 inches)
Card-stock guidelines
●
Set margins at least 2 mm (0.08 inch) away from the edges.
20 Chapter 2 Installation and operation ENWW
Download Service Manual And Resetter Printer at http://printer1.blogspot.com
To Next Page
Loading...
