Replacing the separation pad
If the printer regularly pulls multiple sheets of media at a time, you might need to change the
separation pad. Recurring feed problems might indicate that the separation pad is worn.
Normal use with good-quality media causes wear. The use of poor-quality media might require more
frequent replacement of the separation pad.
NOTE Before you change the separation pad, clean the pickup roller. See Cleaning the
pickup roller on page 29. To order parts, go to http://www.hp.com/go/hpparts.
1. Turn off the printer, unplug and remove the power cord. Wait for the printer to cool.
2. At the back of the printer, use a #2 Phillips screwdriver to unscrew the two screws that hold the
separation pad in place.
3. Remove the separation pad.
ENWW User-replaceable parts 33
Download Service Manual And Resetter Printer at http://printer1.blogspot.com
To Next Page
Loading...
