4. Gently release the small, white tabs on each side of the pickup roller by pushing them away
from the roller, and then rotate the pickup roller toward the front.
CAUTION Use gentle pressure to release the small, white tabs to avoid breaking them.
5. Gently pull the pickup roller up and out.
6. Position the new pickup roller in the slot of the previous pickup roller.
NOTE Circular and rectangular pegs on each side prevent you from incorrectly
positioning the pickup roller.
7. Rotate the top of the new pickup roller into position until the white tabs on each side of the roller
snap the roller into place.
ENWW User-replaceable parts 31
Download Service Manual And Resetter Printer at http://printer1.blogspot.com
To Next Page
Loading...
