3. Release the tab on the bottom right side of the front cover, and then pull the bottom of cover
away from the chassis. Repeat this step for the left side of the front cover.
1
2
Figure 5-18 Remove the front cover (2 of 3)
4. With the bottom of the front cover released, pull up and back at the top of the cover while gently
rocking it to release all of the tabs at the top, and remove the front cover.
Figure 5-19 Remove the front cover (3 of 3)
Reinstallation tip When reinstalling the front cover, make sure that the tabs on the top
of the cover are securely in place, and then press the bottom of the front cover into place.
72 Chapter 5 Removal and replacement ENWW
Download Service Manual And Resetter Printer at http://printer1.blogspot.com
To Next Page
Loading...
