ENWW
start guide
19
Step 10. Change the control panel
overlay (optional)
If necessary, use the following
procedure to install the appropriate
control panel overlay for your
language.
1
Locate the control panel overlays in
the output bin of the printer. (These
overlays might have moved during
shipping.)
2
If necessary, remove the overlay
currently installed on the printer:
a
Open the printer’s top cover.
b
Insert a thin, rigid object under the
edge of the overlay, and then pull
up on the overlay until it comes off.
c
Close the top cover.
3
Place the desired control panel
overlay onto the control panel and
snap it into place.
To Next Page
Loading...