Control panel message Description Recommended action
3. Remove the CompactFlash card from
the indicated slot and replace it with a
new card.
4.
Press
to exit.
Checking paper path The engine is turning the rollers to check for
jams.
No action necessary.
Checking printer The engine is performing an internal test. No action necessary.
CHOSEN PERSONALITY NOT
AVAILABLE
alternates with
To continue press
The printer encountered a request for a
personality that did not exist in the printer.
The job is cancelled and no pages are
printed.
1.
Press
to continue.
2. Try a different driver.
Cleaning Page Error - Open Rear bin The rear door was closed when creating a
process page or cleaning page.
No action necessary.
Cleaning... The printer is processing the cleaning page. No action necessary.
Clearing event log This message appears while the event log is
cleared. The printer then returns to the
SERVICE menu.
No action necessary.
Clearing paper path The printer jammed or detected misplaced
media. The printer is attempting to eject these
pages.
No action necessary.
CLOSE REAR BIN The rear door is open after creating a
cleaning page.
Close the rear door.
CLOSE TOP COVER AND FRONT DOOR The top cover and front door need to be
closed.
Close the top cover and front door.
CODE CRC ERROR An error has occurred during a firmware
upgrade.
Reinstall the firmware.
Creating...CLEANING PAGE The printer is generating a cleaning page.
The printer returns to the Ready state after.
1. Load the cleaning page into tray 1.
2. Press Menu.
3. Select PRINT QUALITY, and then press
.
4. Select PROCESS CLEANING PAGE,
and then press
.
DATA RECEIVED
alternates with
Ready
The printer received data and is waiting for a
form feed. The message disappears when
the printer receives another file.
The printer is paused.
If the printer is waiting for a form feed,
press
to continue.
If the printer is paused, press Stop to
continue.
Date/Time=[YYYY]/[MMM]/[DD] [HH]:
[mm]
To change press
To skip, press STOP
The printer has an internal clock that tracks
the date and time.
Press to change the date and time.
Press Stop to skip this step. You can set the
date and time later by using the SYSTEM
SETUP menu. Press
to exit.
Deleting Private Jobs The printer is in the process of deleting a
private job.
No action necessary.
ENWW Control-panel messages 211
To Next Page
Loading...