Control panel message Description Recommended action
RAM DISK FILE OPERATION FAILED
alternates with
Ready
To clear press
The printer received a PJL file system
command that attempted to perform an
illogical operation (for example, to download
a file to a non-existent directory).
1. Printing can continue.
2.
To delete this message, press
.
3. If the message reappears, a problem
with the software program might exist.
RAM DISK FILE SYSTEM IS FULL
alternates with
Ready
To clear press
The printer received a PJL file system
command to store something on the file
system, but the file system is full.
1. Use HP Web Jetadmin software to
delete files from the RAM disk memory
and try again.
2.
To delete this message, press
.
See
HP Web Jetadmin on page 14 for more
information.
RAM DISK IS WRITE PROTECTED
alternates with
Ready
To clear press
The file system is protected and no new files
can be written to it.
1. To enable writing to the RAM disk
memory, use HP Web Jetadmin to turn
off write protection.
2.
To delete this message, press
.
See
HP Web Jetadmin on page 14 for more
information.
RAM DISK X Initializing
alternates with
DO NOT POWER OFF
The new RAM disk installed in slot X is
initializing.
No action necessary.
Ready <IP Address> The printer is online and ready for data, and
no status or device attendance messages are
pending.
To disable the feature:
1. Press Menu.
2.
Use
to scroll to CONFIGURE
DEVICE.
3.
Use
to scroll to SYSTEM SETUP.
4.
Use
to scroll to SHOW ADDRESS.
5.
Use
to scroll to OFF.
6.
Press
to select and save the option.
Receiving upgrade A firmware upgrade is in progress. Do not turn the printer off until the printer
returns to Ready.
REINSERT DUPLEXER The duplexer is not installed or is not installed
correctly.
1. Turn the printer off.
2. Remove the duplexer and then reinstall
it.
3. Turn the printer on.
REPLACE BLACK CARTRIDGE
alternates with
<current status message>
The print cartridge is nearing the end of its
useful life and the CARTRIDGE OUT setting
is set to CONTINUE. If CARTRIDGE OUT is
set to STOP, the message becomes an error
and printing will not continue until
CARTRIDGE OUT is set to CONTINUE.
1.
Press
to see step-by-step
information.
2. Order HP part number Q7516-67901.
ENWW Control-panel messages 217
To Next Page
Loading...