Security
The following illustration and table describe how to use the Security screen.
Figure 3-9 Security screen
1
5
2
3
4
Table 3-6 Security
Callout Area on the screen Information or capability that the area provides
1 HP EWS tabs and menus For more information, see Navigating through the HP Embedded Web Server
on page 4.
2 HP Jetdirect Security
Configuration Wizard button
The HP Jetdirect Security Configuration Wizard button allows you to
configure security settings for the device's HP Jetdirect print server.
3 Configure Security Settings
button
The Configure Security Settings button allows you to configure security
settings for the device's management and printing systems.
4 Perform Secure Storage Erase
button
The Perform Secure Storage Erase button allows you to perform disk wipes
that will remove all data that has been stored on any mass storage unit
attached to the device.
NOTE: The settings for the type of Secure Storage Erase to be performed
can be configured in the File Erase Mode section of the device's security
settings page.
ENWW Security 37
To Next Page
Loading...
