Callout Area on the screen Information or capability that the area provides
NOTE: The device's file system password must be set before a Secure
Storage Erase operation can be performed. The file system password can
be set in the File System Password section of the device's security settings
page. See
Configure Security Settings on page 38.
NOTE: This button does not appear if the device does not have a mass
storage device installed.
5 Status of Security Settings This section presents a summary of the current security settings on the
device. These settings can be modified by clicking on the Configure
Security Settings button.
Configure Security Settings
Use the Configure Security Settings screen to set the desired levels of security. The following
illustration and table describe how to use this screen.
Figure 3-10 Configure Security Settings screen – 1 of 2
1
2
3
4
Table 3-6 Security (continued)
38 Chapter 3 Configuring the product from the Settings screens ENWW
To Next Page
Loading...
