Figure 3-11 Configure Security Settings screen – 2 of 2
5
6
7
8
9
Table 3-7 Configure Security Settings
Callout Area on the screen Information or capability that the area provides
1 Device Password Use this feature to set your password using a maximum of 16 characters.
The device password allows you to control who can access and change
device settings.
To assign or change the device password:
1. If the device currently has a password assigned, type the current device
password in the Old Password text box.
2. Type the new device password you want to use in the New
Password text box.
3. Type the same device password in the Verify Password text box.
4. Click Apply at the bottom of the page.
5. An authorization dialog box appears. Use the new password to re-
authenticate to the device.
ENWW Security 39
To Next Page
Loading...
