NOTE: This process synchronizes the device clock with the network time server clock.
1. Select the Enable Clock Drift Correction check box.
2. In the Network Time Server Address field, type the TCP/IP address or the hostname of the clock
which you want to use for correction of the product clock drift.
NOTE: Alternatively, you can click the Automatically Find Server button to find a time server
on your network and automatically fill in this field.
3. In the Local Port to Receive Time from Server field, type the number of the appropriate port.
4. Click OK.
NOTE: Use this screen only to configure the time server for clock drift correction, not to set the clock.
To set the clock, use the main Date & Time screen. For further information, see
Date & Time
on page 60.
62 Chapter 3 Configuring the product from the Settings screens ENWW
To Next Page
Loading...
