Load trays
Paper orientation for loading trays
Load letterhead, preprinted, or prepunched paper
If a duplexer is installed, or if a stapler/stacker is installed, the product alters the way the images for
each page are arranged. If you are using paper that requires a specific orientation, load it according to
the information in the following table.
Tray Single-sided printing,
no stapler/stacker
Duplex printing, no
stapler/stacker
Single-sided printing
with the stapler/stacker
Duplex printing with the
stapler/stacker
Tray 1 Face-up
Top edge leading into the
product
Face-down
Bottom edge leading into
the product
Face-up
Bottom edge leading into
the product
Face-down
Top edge leading into the
product
All other trays Face-down
Top edge at the front of
the tray
Face-up
Bottom edge at the front of
the tray
Face-down
Bottom edge at the front of
the tray
Face-up
Top edge at the front of
the tray
78 Chapter 6 Paper and print media ENWW
To Next Page
Loading...