HP LASERJET ENTERPRISE 500 MFP - Page 228

Y = calibration type, Z = event
◦
47.FC.00 (event code): Color plane registration (CPR) image not found at system initialization
◦
47.FC.01 (event code): CPR store image failure
◦
47.FC.02 (event code): CPR image not found
◦
47.FC.03 (event code): CPR print engine execution failure
◦
47.FC.10 (event code): Consecutive Dmax Dhalf image not found at system initialization
◦
47.FC.11 (event code): Consecutive Dmax Dhalf store image failure
◦
47.FC.12 (event code): Consecutive Dmax Dhalf image not found
◦
47.FC.13 (event code): Consecutive Dmax Dhalf print engine execution failure
◦
47.FC.20 (event code): Error diffusion image not found at system initialization
◦
47.FC.21 (event code): Error diffusion store image failure
◦
47.FC.22 (event code): Error diffusion image not found
◦
47.FC.23 (event code): Error diffusion print engine execution failure
◦
47.FC.30 (event code): Drum speed adjustment Image not found at system initialization
◦
47.FC.31 (event code): Drum speed adjustment store image failure
◦
47.FC.32 (event code): Drum speed adjustment image not found
◦
47.FC.33 (event code): Drum speed adjustment print engine execution failure
◦
47.FC.40 (event code): Pulse width modulation image not found at system initialization
◦
47.FC.41 (event code): Pulse width modulation store image failure
◦
47.FC.42 (event code): Pulse width modulation image not found
◦
47.FC.43 (event code): Pulse width modulation print engine execution failure
Recommended action
1. Turn the product off and then on.
2. If the error persists, reload the firmware.
47.WX.YZ Printer calibration failed
Description
The print quality calibration failed. This message is for development and will not be seen by customers.
Recommended action
Turn the product off and then on.
208 Chapter 2 Solve problems ENWW