Scan and send to USB Flash Drive
Introduction
The printer can scan a le and save it on a USB ash drive. Before using this feature, use the HP Embedded
Web server to enable and congure it.
Scan and save the document to a USB ash drive
NOTE: You might be required to sign in to the printer to use this feature.
1. Place the document face-down on the scanner glass, or place it face-up in the document feeder and
adjust the paper guides to t the size of the document.
2. Insert the USB ash drive into the USB port near the printer control panel.
3. From the Home screen on the printer control panel, scroll to and touch the Save to USB button.
4. Save the le on the root of the USB ash drive, save it in an existing folder, or touch the New Folder
button to create a new folder on the USB ash drive..
5. Touch the File Name text eld to open a keyboard, and then type the name for the le, and then touch
the OK button.
6. To congure settings for the document, touch the More Options button. For example:
●
Select File Type and Resolution to specify the type of le to create, the resolution, and the output
quality.
●
If the original document is printed on both sides, select Original Sides, and then select 2 Sided.
7. Touch the preview button to preview the document.
8. When the document is re
ady, touch the Start
button to save the le.
ENWW Scan and send to USB Flash Drive 105
To Next Page
Loading...