HP LaserJet Enterprise MFP M577 series

6. Select one of the predened options. Touch the Save button.
7. Touch the Start button.
Check the color settings
Follow these steps to adjust the color setting:
1. From the Home screen on the product control panel, scroll to and touch the Administration button.
2. Open the Scan/Digital Send Settings menu.
3. Select the category of scan and send settings that you want to congure.
4. Open the Default Job Options menu.
5. Touch the
Color/Black button.
6. Select one of the
predened options. Touch the Save button.
7. Touch the Start button.
Check the image-adjustment settings
Adjust these additional settings to improve scan quality:
●
Sharpness: Clarify or soften the image. For example, increasing the sharpness could make text appear
crisper
, but decreasing it could make photos appear smoother.
●
Darkness: Increase or decrease the amount of white and black used in colors in scanned images.
●
Contrast: Increase or decrease the dierence between the lightest and the darkest color on the page.
●
Background Cleanup: Remove faint colors from the background of scanned images. For example, if the
original document is printed on c
olored paper, use this feature to lighten the background without
aecting the darkness of the image.
●
Automatic Tone: Available for Flow printers only. For original documents that have at least 100
charact
ers of text on the page, the printer can detect which edge is the top of the page, and it orients the
scanned images appropriately. If some of the pages are upside-down in relation to the other pages, the
resulting scanned image has all pages right-side-up. If some of the pages have a landscape orientation,
the printer rotates the image so that the top of the page is at the top of the image.
1. From the Home screen on the printer control panel, scroll to and touch the
Administration button.
2. Open the Scan/Digital Send Settings menu.
3. Select the category of scan and send settings that you want to congure.
4. Open the Default Job Options menu.
5. Touch the
Image Adjustment button.
6. Adjust the sliders to set the levels, and then touch the Save button.
7. Touch the Start button.
NOTE: These settings are temporary. After you have nished the job, the printer returns to the default
set
tings.
ENWW Improve scan image quality 193