Macintosh software
●
HP Product Setup Assistant
●
HP Uninstaller
●
HP LaserJet software
◦
HP Scan
◦
HP Director
HP Director is a software program for working with documents. When the document is loaded
into the ADF and the computer is connected directly to the product, HP Director appears on
the computer screen to initiate faxing, scanning, or changing settings on the product through
Macintosh Configure Device.
HP Director also includes the HP product Setup Assistant for setting up fax and print queues.
◦
Scan to e-mail program
Supported printer drivers
The most recent drivers are available at www.hp.com/support/ljm1319. Depending on the configuration
of Windows-based computers, the installation program for the product software automatically checks
the computer for Internet access to obtain the latest drivers.
Connectivity
Connect the product directly to a computer with USB
NOTE: Do not connect the USB cable from the product to the computer until the installer prompts you
to do so.
1. Insert the product CD into your computer. If the software installer does not start, navigate to the
setup.exe file on the CD and double-click the file.
2. Follow the installer instructions.
3. Allow the installation process to complete, and then restart the computer.
ENWW Connectivity 9
To Next Page
Loading...
