Use the HP Toolbox software
NOTE: You must perform a full software installation to use the HP Toolbox.
HP Toolbox is a software program that you can use for the following tasks:
●
Check the product status
●
Configure the product settings
●
Configure pop-up-alert messages
●
View troubleshooting information
●
View online documentation
View HP Toolbox
Open HP Toolbox in one of these ways:
●
In the Windows system tray, double-click the product icon (
).
●
On the Windows Start menu, click Programs (or All Programs in Windows XP), click HP, click
HP LaserJet M1319, and then click HP Toolbox.
The HP Toolbox software contains the following sections for each product in the Devices window:
●
Status
●
Fax
In addition to these sections, every page contains the following common elements:
●
Shop for Supplies
●
Other links
Status
The Status folder contains a link to the Device Status main page. Use this page to view product status
information. This page indicates product conditions such as a jam or an empty tray. After you correct a
product problem, click Refresh status to update the product status.
ENWW Use the HP Toolbox software 27
To Next Page
Loading...
