HP LaserJet M2727 - Multifunction Printer - Page 87

●
Labels
●
Letterhead
●
Envelope
●
Preprinted
●
Prepunched
●
Colored
●
Bond
●
Recycled
●
Mid weight
●
Extra heavy
●
Rough
Change the media size and type for the current job
NOTE: Change the default media size and type settings to change the media size and type.
1. On the product control panel, press Paper.
2. Use the arrow buttons to select a media size, and then press OK.
3. Use the arrow buttons button to select a media type, and then press OK.
4. Press Start Copy.
Change the default media-size setting
1. On the product control panel, press Setup.
2. Use the arrow buttons to select System setup, and then press OK.
3. Use the arrow buttons to select Paper setup, and then press OK.
4. Use the arrow buttons to select Def. paper size, and then press OK.
5. Use the arrow buttons to select a media size, and then press OK.
6. Press OK to save the selection.
Change the default media-type setting
1. On the product control panel, press Setup.
2. Use the arrow buttons to select System setup, and then press OK.
3. Use the arrow buttons to select Paper setup, and then press OK.
4. Use the arrow buttons to select Def. paper type, and then press OK.
5. Use the arrow buttons to select a media type, and then press OK.
6. Press OK to save the selection.
ENWW Copy settings 75