Using this option, administrators can create a silent (unattended) installer that is customized with any
of the following selections:
●
Language
●
Operating system
●
Print drivers
●
Components
NOTE For detailed information about the Installer Customization Wizard, see the Installer
Customization Wizard Readme. (See
Installer Customization Wizard Readme.)
Topics:
●
Run the Installer Customization Wizard
●
Dialog boxes
●
Distribution
Run the Installer Customization Wizard
The Installer Customization Wizard runs from the CD. It can be started from the CD browser, depending
on device-specific instantiation. It runs separately from the common Microsoft Installer (MSI), and has
its own interface.
Running the Installer Customization Wizard produces one installation package and a response file
(RESPONSE.INI) for a single-system installation. The installation package might work for multiple
systems that have the same response information, or the RESPONSE.INI file can be directly edited for
system-configuration differences.
For the exact text with which to replace entries in the RESPONSE.INI file, see the HP Installer
Customization Wizard Readme. (See
Installer Customization Wizard Readme.)
To run the Installer Customization Wizard
1. Insert the HP LaserJet M5025/M5035 MFP software CD in the CD-ROM drive.
2. In the CD browser main screen, click Optional Software.
3. Click Installer Customization Wizard.
4. Follow the instructions in the dialog boxes to complete the installation.
Dialog boxes
The Language Selection dialog box appears, as shown in the following figure.
90 Chapter 3 Install MS Windows printing-system components ENWW
MS Windows install
To Next Page
Loading...
