4 HP Send Fax driver
Introduction
The HP Send Fax driver allows the user to send faxes from a PC to one or more network connected
MFPs. The HP Send Fax driver can be accessed by printing from an application and selecting
HP Send Fax driver in the Print dialog box. Other settings in the driver are available by accessing the
driver settings.
This document describes the options that are available for the HP Send Fax driver. These options are
located on the dialog box tabs that are displayed through the driver Properties, Printing Defaults,
Printing Preferences, and Document Properties.
Most of the tabs and options available on these driver dialog boxes are standard Windows print settings
and selections. Only the settings and selections specific to the HP Send Fax driver are covered.
Topics:
●
Access to the HP Send Fax driver
●
Help system
●
Driver Properties tab features
●
Printing Defaults, Printing Preferences, Document Properties tab features
NOTE For information about installing, configuring, and using the HP Send Fax driver, refer to
the HP LaserJet MFP Analog Fax Accessory 300 Send Fax Driver Guide available on the printing-
system CD or on the Web at:
www.hp.com/go/ljm5035mfp_software
www.hp.com/go/ljm5025mfp_software
NOTE For information on sending faxes directly from the device control panel, see the HP
LaserJet MFP Analog Fax Accessory 300 Fax Guide.
ENWW Introduction 111
HP Send Fax driver
To Next Page
Loading...
