The following Printing Preferences print-driver tabs are available:
●
Advanced
●
Paper/Quality
●
Effects
●
Finishing
●
Output
●
Job Storage
●
Services
All of these tabs are device-specific.
The Job Storage tab is available only when the Job Storage setting is Enabled on the tab. To make
the settings take effect, click OK on the Device Settings tab.
The Output tab is available only when an output device is connected to the HP LaserJet M5025/
M5035 MFP.
Properties driver tabs
This set of tabs controls the driver behavior and driver connections. To gain access to the Properties
tabs, follow these steps:
1. Click Start.
2. Select Settings.
3. Click Printers (Windows 2000) or Printers and Faxes (Windows XP Professional and
Windows Server 2003) or Printers and Other Hardware Devices (Windows XP Home).
4. Right-click the device name.
5. Click Properties.
The following Properties print-driver tabs are available:
●
General
●
Sharing
●
Ports
●
Advanced
●
Security
●
Device Settings
●
About
132 Chapter 5 HP PCL 6, PCL 5, and PS Emulation drivers for MS Windows ENWW
HP drivers for Windows
To Next Page
Loading...
