HP LASERJET M5025 - Page 169

The Source is: drop-down menu can contain the following options, depending on what has been
installed on the device:
●
Automatically select
●
Printer Auto Select
●
Manual Feed in Tray 1
●
Tray 1
●
Tray 2
●
Tray 3
●
Tray 4
●
Tray 5
●
Tray 6
The default setting is Automatically Select. When this setting is selected, the HP LaserJet M5025/
M5035 MFP uses the source tray that supports the selected media size. If you select a source tray other
than Automatically select, make sure that the correct media size is loaded in the source tray. For
information about media sources, see
Media attributes.
Type is:
The Type is: drop-down menu shows all of the media types that the HP LaserJet M5025/M5035 MFP
supports. When you use the default setting, Unspecified, the device uses the default media type, which
is usually Plain.
No mechanism exists for manually adding custom media types through the driver. Custom types can
be added only by using the bidirectional communication mechanism, so they must already exist in the
device when the bidirectional query occurs. If bidirectional communication is enabled, then the
information an updated list of media types is returned. If bidirectional communication is not enabled,
then the driver looks for custom media types that have been saved from a previous bidirectional
communication query, and uses those. Otherwise, no custom media types are available through the
driver.
The following standard types appear in the list:
●
Unspecified
●
Plain
●
Preprinted
●
Letterhead
●
Transparency
●
Prepunched
●
Labels
●
Bond
●
Recycled
ENWW Paper/Quality tab features 149
HP drivers for Windows