First Page
Use the First Page options to select an alternative media type or source for the first page of a document.
The following figure shows the appearance of the Paper Options group box when the Use Different
Paper/Covers check box is selected.
Figure 5-7 First Page options
The following are the First Page options:
●
Size is: drop-down menu
●
Source is: drop-down menu
●
Type is: drop-down menu
The Size is: setting specifies the media size to use for the entire print job. Changes made to the Size
is: setting here override any previous Size is: settings in other Use Different Paper/Covers options.
The Source is: setting specifies the source tray to use for printing a document. The list of source trays
depends on the device accessories that are installed. Any optional trays that are installed through the
Device Settings tab also appear here.
The Type is: drop-down menu shows all of the media types that the device supports.
NOTE Use the same size of media for the entire print job. All Use Different Paper/Covers
options use the last Size is: setting selected in any one of the Use Different Paper/Covers
options.
When you change the type and source of the media and covers, the settings remain configured
until you close the software program.
152 Chapter 5 HP PCL 6, PCL 5, and PS Emulation drivers for MS Windows ENWW
HP drivers for Windows
To Next Page
Loading...
