Figure 5-26 PS Emulation driver Device Settings tab
The Device Settings tab contains the following controls:
●
Form to Tray Assignment
●
Font Substitution Table
●
External Fonts
●
PS Emulation driver Device Settings
●
Installable Options
Form to Tray Assignment
A network administrator can use Form to Tray Assignment to specify the media size in each input tray.
The HP LaserJet M5025/M5035 MFP supports more than one source of media. Assign a form (which
defines the media size and margins) to each media source. When a form is matched to a source, select
the form to print. The device prints from the tray to which that form is assigned.
Network administrators can use the Form to Tray Assignment setting to specify, in the driver, the
media size that is loaded into each available input tray. The use of forms constrains the choices that
are available in the media-size list on the Paper/Quality tab in the Printing Preferences driver tabs.
This constraint prevents (or reduces the likelihood of) tying up the device with media-mount messages
that occur when users request sizes or types that are not available.
188 Chapter 5 HP PCL 6, PCL 5, and PS Emulation drivers for MS Windows ENWW
HP drivers for Windows
To Next Page
Loading...
