If the device does not appear, or if the correct information does not appear in the Kind field, see
Troubleshooting the printer setup.
If you are installing the device using a network connection, continue with the following steps.
4. Click Add in the Printer List (or the + button in the Print & Fax utility) to open the Printer
Browser screen.
5. You can use either Bonjour or IP Printing for the network connection.
NOTE Bonjour is the easiest method and is the best method to use if the device is installed
on your local network.
IP Printing must be used if you are installing the device on a different network.
If you are using Bonjour, carry out the following steps:
a. Click the Default Browser tab.
Figure 6-16 Default Browser tab
b. Select the HP LaserJet M5035 MFP from the list. The software verifies that the device is
connected to the network and the Print Using field is automatically populated with the correct
PPD for the device.
NOTE If you are on a network that has more than one HP LaserJet M5025/
M5035 MFP, print a configuration page and match the Bonjour Printer Name to the
name on the list to identify the device you are installing. (See
Print the configuration
page .)
218 Chapter 6 Macintosh ENWW
Macintosh
To Next Page
Loading...
