d. On the first configuration page, under Product Settings, find the IP Address. Type this
address into the Address field on the add printer screen.
e. The Name, Location, and Print Using information will automatically be filled in. If the
HP LaserJet M5025/M5035 MFP Series PPD does not appear in the Print Using field, turn
the computer off and then on again and restart the setup process.
6. Click Add. The Installable Options screen appears.
Figure 6-18 Installable Options screen
7. A device hard disk is installed by default. Do not change the Printer Hard Disk setting.
8. If the device has trays 4, 5, or 6, change the appropriate setting for each tray from Not Installed
to Installed.
9. If the device has a duplex unit, select the Duplex Unit check box.
220 Chapter 6 Macintosh ENWW
Macintosh
To Next Page
Loading...
