2. In the Applications folder, open the Utilities folder, and then run the Print Center. The Printer
List screen appears.
Figure 6-23 Printer List screen
3. If you are installing the device using a USB connection, verify that the device appears on the device
list. The Kind column in the device list should display HP LaserJet M5025/M5035 MFP Series. If
this is the case, the setup is complete.
NOTE If the Kind column does not appear in the device list, go to the View menu, and
choose Columns and then Kind.
If the device does not appear, or if the correct information does not appear in the Kind column,
see
Troubleshooting the printer setup.
If you are installing the device using a network connection, continue with the following steps.
ENWW Macintosh install and uninstall instructions 225
Macintosh
To Next Page
Loading...
