NOTE If the automatic selection fails, or if you want to manually select a PPD file, click
the Printer Model drop-down menu, choose HP, and then choose the PPD file that you
want to add. If the HP LaserJet M5025/M5035 MFP Series PPD does not appear in the
Model Name list, turn the computer off and then on again and restart the setup process.
If you are using IP Printing, carry out the following steps:
a. Print out the device configuration pages.
To print a configuration page, follow these instructions.
i. Touch Administration.
ii. Touch Information.
iii. Touch Configuration/Status Pages.
iv. Touch Configuration Page.
v. Touch Print.
The device prints the configuration page.
b. On the first configuration page, under Product Settings, find the IP Address. Type this
address into the Printer's Address field.
c. Choose Printer Model and then choose the HP LaserJet M5025/M5035 MFP in the Model
Name list.
6. Click Add. The HP LaserJet M5025/M5035 MFP appears in the Printer List.
7. Select the HP LaserJet M5025/M5035 MFP, go to the Printers menu, and choose Show Info.
8. Choose Installable Options from the top drop-down menu.
Figure 6-25 Printer Info — Installable Options dialog (sample)
ENWW Macintosh install and uninstall instructions 227
Macintosh
To Next Page
Loading...
