Deleting a job-storage print job
Sometimes it is necessary to delete a print job from the device memory. You can do this from the device
control panel.
1. Touch Job Storage.
2. Touch desired folder on the left.
3. Touch desired document.
If you have set a PIN for the job stored, you will be asked to enter the correct PIN. Once PIN is
confirmed, the job will be unlocked.
4. Touch Delete.
5. A message will appear asking Do you want to delete this stored job? Touch Yes. The document
will be deleted.
Or, do the following:
1. Touch Job Storage.
2. Touch desired folder on the left.
3. Touch desired document.
4. Touch Delete.
If you have set a PIN for the job stored, you will be asked to enter the correct PIN. Once PIN is
confirmed, the job will be deleted without a verification screen.
E-mail Alerts
The E-mail Alerts screen is available if the HP LaserJet M5025/M5035 MFP is installed over a network
connection. It is not available when the MFP is installed over a USB connection.
Choose E-mail Alerts to configure the HP LaserJet M5025/M5035 MFP to send e-mail notifications to
users.
If a user name and password have been set, you might need to obtain them from the IT administrator.
For more information, see the HP Embedded Web Server User Guide.
ENWW Macintosh HP Printer Utility 249
Macintosh
To Next Page
Loading...
